SMOK R-Kiss 2 200W Box Mod Manual: A Comprehensive Guide to Getting Started
SMOK R-Kiss 2 200W Box Mod Manual: A Comprehensive Guide to Getting Started
Blog Article
The SMOK R-Kiss 2 200W Box Mod is a high-performance vaping device that offers a range of advanced features and settings. Whether you're a beginner or an experienced vaper, this manual will provide you with a comprehensive guide to getting started with your smok r-kiss 2 200w box mod manual.
Unpacking and Inspection
Before you start using your R-Kiss 2, make sure to carefully unpack and inspect the device. The package should include:
- SMOK R-Kiss 2 200W Box Mod
- Micro-USB cable
- User manual
- Warranty card
Make sure to check the device for any signs of damage or defects. If you notice any issues, contact the manufacturer or retailer immediately.
Charging the Battery
The R-Kiss 2 is powered by two 18650 batteries, which are sold separately. To charge the batteries, follow these steps:
1. Connect the micro-USB cable to the charging port on the side of the device.
2. Connect the other end of the cable to a computer or wall adapter.
3. The device will automatically start charging the batteries.
4. The charging process typically takes 2-3 hours.
Operating the Device
To operate the R-Kiss 2, follow these steps:
1. Press the fire button five times to turn on the device.
2. The device will display the main menu, which includes options for wattage mode, temperature control mode, and memory mode.
3. Use the "+" and "-" buttons to navigate through the menu and select your desired mode.
4. In wattage mode, use the "+" and "-" buttons to adjust the wattage output.
5. In temperature control mode, use the "+" and "-" buttons to adjust the temperature setting.
6. Press the fire button to vape.
Modes and Settings
The R-Kiss 2 offers a range of modes and settings to customize your vaping experience. Here's a brief overview of each mode:
- Wattage Mode: In wattage mode, you can adjust the wattage output from 1-200W.
- Temperature Control Mode: In temperature control mode, you can adjust the temperature setting from 100-315°C (200-600°F).
- Memory Mode: In memory mode, you can store up to 4 different settings profiles, allowing you to quickly switch between different vaping styles.
Safety Features
The R-Kiss 2 includes a range of safety features to protect you and your device. Here are some of the key safety features:
- Overcharge Protection: The device will automatically stop charging when the batteries are fully charged.
- Over-discharge Protection: The device will automatically turn off when the batteries are fully discharged.
- Short Circuit Protection: The device will automatically turn off if a short circuit is detected.
- Low Voltage Protection: The device will automatically turn off if the battery voltage falls below a certain threshold.
Troubleshooting
If you encounter any issues with your R-Kiss 2, here are some troubleshooting tips:
- Device Not Turning On: Check that the batteries are properly installed and charged.
- Device Not Charging: Check that the micro-USB cable is properly connected and that the device is turned off.
- Device Not Producing Vapor: Check that the coil is properly installed and that the device is set to the correct mode.
Conclusion
The SMOK R-Kiss 2 200W Box Mod is a high-performance vaping device that offers a range of advanced features and settings. By following this manual, you'll be able to get started with your R-Kiss 2 and enjoy a satisfying and enjoyable vaping experience.
read more visit https://vapeuniverse.co/products/smok-r-kiss-2-200w-mod-kit